Disc feeder is a high-efficiency feeding equipment, which adopts advanced hard-toothed vertical reducer transmission, frequency conversion speed regulation system, large diameter slewing bearing, under-disk sealing device and controllable box door, with high transmission efficiency, stable operation and high control accuracy.
Disc feeder is easy to operate, can evenly adjust the feeding amount and realize centralized and automatic control of production process to achieve the purpose of adjusting the feeding amount. Disc feeder can feed to belt conveyor, bucket elevator, screening and other equipment.
Three major features of disc feeder
Disc feeder has simple structure, uniform feeding and good continuous performance;
Flow rate can be changed and controlled at any time, easy to operate;
Product operation is stable and simple and easy to operate;
Wide application range, energy-saving and efficient;
Large bearing capacity and stable operation;
Instructions for use of disc feeder
Preparation before starting
- Carefully check whether all fasteners are tightened and no loosening occurs.
- Check whether the oil in the reducer meets the standard requirements.
Maintenance and use
- Feeding can only start after the feeder is operating normally.
- Feeding should be uniform and continuous, and there should be no jamming.
- Feeding should be stopped before stopping, and the machine can be stopped only after the material on the disc is completely discharged.
- The oil in the reducer should be replaced about once every six months.
Conclusion
The disc feeder is a volumetric metering vibrating feeder。The equipment can feed the material to the next process uniformly and continuously, and is suitable for feeding non-sticky materials such as ore, coal powder, cement, clinker, limestone, etc. in powder, granular or small pieces. It is not suitable for feeding materials with high viscosity, difficult to flow or particularly good fluidity.